Factory-approved and authorized Taylor products.
Taylor Bridge Pins
UPC #7252
Only
Left!
Preorder Today
Coming Soon
Call to order!
Only
Left!
Preorder Today
Coming Soon!
Call to order!
Get It Today Locally
Authentic, Authorized Gear
Factory Expert Service & Support
Responsive customer service from factory experts trained to help you get the most out of your guitar.
Fast, Free Shipping
Arrives at your door in under a week for free ($39.99 order minimum for free shipping).
Hassle-free, 30-day Returns
Buy with confidence knowing we stand behind our products.
Overview
- Pack of 6 replacement acoustic guitar bridge pins
- Standard size fits all 6-string Taylor models
- Black plastic, ebony or ebony with abalone dot
Taylor Bridge Pins
Replacing lost or worn bridge pins is now just a click away. Choose classic ebony, add an extra touch of style with ebony and abalone dots, or opt for a minimalist look withblack plastic. Available in packs of six only*.
*Abalone dot bridge pins are available to ship within the United States only.
Model #7250 (Classic Ebony), #7251 (Ebony and Abalone Dots), #7252 (Black Plastic)
Questions & Answers
Preguntas frecuentes
51 questions
Will they fit Taylor GS mini plus?
Yes.
Will these bridge pins fit any of my Taylor Guitars including my GS mini?
Yes. Unless you have a GS Mini Bass.
Will they fit a Taylor 814ce???
Yes.
Will classic ebony fit a Taylor GS Mini?
Yes.
Will these ebony bridge pins with abalone dots fit my Liberty Tree guitar ?
Yes. These will fit any Taylor guitar other than the GS Mini Bass.
Show all 51 questions
Is the 114ce-SB model guitar specific with what bridge pins to use?
You can use any of the bridge pins listed on our site.
They look to be unslotted. Are they? Thank you.
They are slotted.
Are the bridge pins for the 562ce (12 string, 12 fret, 2 strings to each pin) the same as the pins for a regular 6 string?
That is correct. These pins are used for both, 6 string and 12 string (6 pin) models.
I have Taylor 555 twelve string my peg pins seem to have gotten loser or are the holes biger they fit, or should I get new ones ?
The pins feel loose until it's tuned, and then the string tension holds them in place.
I'd like the sizes of the bridge pin EBONY Taylor (size of the thin and larg part , high (inside the bridge)?
Taper: 3°–3.5°
Top of taper: 0.207" (5.26 mm)
Top diameter (collar): 0.295" (7.49 mm)
Length: 1.035" (26.29 mm)
Top of taper: 0.207" (5.26 mm)
Top diameter (collar): 0.295" (7.49 mm)
Length: 1.035" (26.29 mm)
I bought a set of classic ebony pins and they fit perfectly with my GS Mini Koa. However, when I bought and tried the ebony with abalone dots, it doesn't fit the GS Mini Koa nor the GS Mini Mahogany. The place I bought it from said it will not fit the GS Minis. Is it true that the classic will fit but the one with abalone dots will not? That is my experience so far.
Our classic ebony pins and ebony pins with abalone dots are the same size—the only difference is the decorative dot. Both feature a 3°–3.5° taper and the same overall dimensions.
That said, slight variations in the string slot size can occur, which sometimes affects how the pins seat in different guitars. We recommend using the pins with the larger string slots for the bass strings whenever possible to ensure a proper fit.
That said, slight variations in the string slot size can occur, which sometimes affects how the pins seat in different guitars. We recommend using the pins with the larger string slots for the bass strings whenever possible to ensure a proper fit.
will this fit the 212ce?
Yes.
Will the The Ebony Pins be a good replacement for My T5 Koa?
Yes. They will work great for your T5.
which pins are the perfect fit for 614ce BE, either pearl or abalone dot?
Our ebony pins are the same size for either the plain or the abalone. Either will work great for your BE614ce.
Will these fit 210ce?
Yes.
Will six string bridge pins fit 1999 K-65 12 string?
Yes.
i have a 2014 414ce will ebony wwith fit or need sanded ?
These will fit your 414ce.
Are the classic ebony pins wooden or plastic?
The ebony pins are made of wood, they're solid ebony.
Does it fit the 324ce?
Yes.
The ebony pins are shorter than the plastic ones and on the 214 ce they cause a vibration on the strings. is this the reason and is it better to go back to the plastic ones? Even though they are shorter, can they still be used?
If the ball ends are fully seated against the pin plate as designed, there shouldn’t be any room for rattling. Just make sure to tug the strings firmly against the pin plate when re-stringing.
<a href="https://www.taylorguitars.com/support/strings/changing-steel-strings" target="_blank">https://www.taylorguitars.com/support/strings/changing-steel-strings</a>
<a href="https://www.taylorguitars.com/support/strings/changing-steel-strings" target="_blank">https://www.taylorguitars.com/support/strings/changing-steel-strings</a>
Are these pins size 1 woth 3-degree taper?
Ebony
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter (Collar) = .295"
Length = 1.035"
Plastic
Taper = 4 degrees (already in degrees, no conversion needed)
Top of taper = 5.2 mm ≈ 0.205 inches
Top diameter (Collar) = 7.3 mm ≈ 0.287 inches
Length = 30.5 mm ≈ 1.201 inches
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter (Collar) = .295"
Length = 1.035"
Plastic
Taper = 4 degrees (already in degrees, no conversion needed)
Top of taper = 5.2 mm ≈ 0.205 inches
Top diameter (Collar) = 7.3 mm ≈ 0.287 inches
Length = 30.5 mm ≈ 1.201 inches
Will ebony bridge pins fit 214e?
Yes, they typically fit just fine. If they feel snug they may need to be sanded to fit or you can have the bridge pin holes enlarged by a tech.
will ebony 7251 fit gte mahogany?
Yes.
Will the ebony pins fit my GS mini or not? I notice the yes was”inaccurate “.
The ebony pins will work great with the GS Mini. The "Inaccurate" next to the answers is a link to report inaccurate answers for review by our Support Team.
Thomman are stocking two diameters of Taylor ebony pins, you only have one. What is the right pin for GS mini?
The GS Mini can use either our plastic or Ebony pins.
Ebony pins
Taper = 3 - 3.5 degrees
Top of taper = .207" 5.3 mm
Top diameter = .295" 7.52 mm
Length = 1.035" 26.3 mm
Black Plastic
Taper = 4.18 degrees
Top of taper = .194" 5.2 mm
Top diameter = .291" 7.5 mm.
Length = 1.000" 25.2 mm
Ebony pins
Taper = 3 - 3.5 degrees
Top of taper = .207" 5.3 mm
Top diameter = .295" 7.52 mm
Length = 1.035" 26.3 mm
Black Plastic
Taper = 4.18 degrees
Top of taper = .194" 5.2 mm
Top diameter = .291" 7.5 mm.
Length = 1.000" 25.2 mm
Are these real ebony wood or ebony colored material?
Real Ebony.
Will it fit a big baby 307 GB?
Yes.
Will it fit my 114ce?
Yes.
Will Taylor's (#7251 Ebony and Abalone Dots) fit my Taylor 214e guitar as replacements?
Yes.
Will these ebony with abalone pins fit my 710ce L9?
Yes.
Will these ebony w/abalone pins fit my AD22e?
Yes.
Will the classic ebony bridge pins fit a Baby Taylor?
Yes.
will the Ebony w/ Abalone #7251 fit my 362ce?
Yes.
Will these pins fit a Big Baby Taylor?
Yes.
are all bridge pins the same size fittin other brands ??
These are designed specifically for Taylor Guitars. They may fit other brands but you would want to check with that manufacturer or measure the current bridge pins to see if ours are compatible.
Ebony Pins,
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter = .295"
Length = 1.035"
Plastic pins,
Taper = 4 degrees
Top of taper = 5.2 mm
Top diameter = 7.3 mm
Length = 30.5 mm
Ebony Pins,
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter = .295"
Length = 1.035"
Plastic pins,
Taper = 4 degrees
Top of taper = 5.2 mm
Top diameter = 7.3 mm
Length = 30.5 mm
What size are the Abalone dots on the Ebony Bridge Pins?
3.5mm
Will these fit a Taylor 200 series guitar?
Yes.
Will the Ebony or Ebony with Abalone pins fit my GS mini?
Yes.
Will the pins with Abalone dots work on the 224ce and the Academy 12e?
Yes.
Does this work with GS mini mahogany?
Yes.
Will these work with a T5?
Yes.
Will this fit a t5?
Yes
Will the ebony bridge pins fit my new 210ce?
Yes.
Will they work with a 310ce ?
Yes.
Will this fit 210CE?
Yes.
Will these fit a baby Taylor?
Yes.
Are these tapered at three (3) , or five (5) degrees?
Ebony pins,
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter = .295"
Length = 1.035"
Plastic pins
Top of taper = 5.2 mm
Top diameter = 7.3 mm
Length = 30.5 mm
Taper = 3 - 3.5 degrees
Top of taper = .207"
Top diameter = .295"
Length = 1.035"
Plastic pins
Top of taper = 5.2 mm
Top diameter = 7.3 mm
Length = 30.5 mm
Will this work for a 562ce--a twelve string guitar with TWO strings anchored by each of 6 (SIX) pins?
Yes.
do they come with a pin remover?
No.
Will these pins work with a 12 string if I get two sets?
Yes.
Are these pins slotted or non-slotted?
All Taylor bridge pins are slotted.
Reviews
Rated 5 out of 5 from 1 rating
Simple but perfect.
These bridge pins are not flashy but they are incredibly consistent in look and fit, and the quality seems about as good as one can expect. These fit my Big Baby Taylor. Taylor says the ebony pins are slightly larger by a few thousandths than the plastic pins. One or two were a hair more snug than the plastic pins, but after pulling and replacing them once everything is a perfect fit. They all sit flush on the bridge. Tone is subjective but they made my acoustic guitar instantly sound as if Jerry Garcia was playing it and not me. Just kidding, of course ;)
Highly recommend.
Highly recommend.