arrow icon-cart icon-email icon-facebook icon-g-plus icon-instagram No-Audio Pause icon-pin Untitled-1 icon-print icon-search icon-show-hide icon-tiktok icon-twitter Audio icon-youtube-play icon-youtube logo-mobile
Symptoms of a Wet Guitar

The ideal humidity range for your guitar is 45-55% relative humidity (RH). Extended exposure to high humidity can lead to guitar damage. Here’s what to look for and how to prevent it.

While much of our energy is devoted to preventing guitars from drying out, it also is possible for guitars to become too wet. Usually, a guitar becomes over-humidified when it has been exposed to the elements for a period of several weeks in an area where the humidity is very high (80-90%), or for several months where the humidity is medium-high (60-70%). In some cases, guitar bodies are over-humidified by well-meaning owners who, in an effort to prevent their guitars from drying, have gotten carried away with soundhole humidifiers.

While high humidity usually will not crack the wood the way low humidity can, the adverse effects can be just as damaging and sometimes can be more costly to repair. The wood in a guitar can swell tremendously, causing glue joints to fail, finish to lift, and neck angles to go bad. Distortions in the wood can remain even after other damage has been repaired, leaving the guitar cosmetically disfigured. Guitars that are too “wet” can sound dull and lifeless from the extra water weight the wood is holding. 

We regularly see customers who live in wet regions and are unaware that the moisture is directly affecting their guitar switch to extra light gauge strings when their swollen guitars become difficult to play. They end up with high action on a dull sounding guitar, with strings too light to get the full, rich tone the guitar normally produces, when a little humidity control would have kept the guitar playing and sounding great. To learn more on this topic, read our Tech Sheets, “Symptoms of a Dry Guitar,” and “Using a Guitar Humidifier,” and you’ll gain an understanding of our wood-drying process, the climate control of our factory, and how relative humidity affects wood.

We do not expect guitar owners to become meteorologists, or to walk on eggshells concerning the safety of their guitars. But by becoming familiar both with the principles of humidity and with how a normal guitar looks and feels, an owner can prevent almost all damage to a guitar and maintain the guitar’s great playability and tone. Basic precautions include: keeping the guitar in its case when not in use; keeping it out of direct sunlight and extremes of heat, cold and high or low humidity; and regularly checking for any significant changes.

Symptoms to look for:

1. High action. Strings that are unusually high off the fretboard, making it difficult to play.
2. The guitar sounds dull and lifeless.
3. Unusual warp on the back at the end block.

wet guitar tail dip
Notice the dip in the center, where the back is glued to the tailblock. It cannot rise at this section, so the back swells on either side, creating a low spot in the middle.
Improper neck angle. Sighting the neck to the bridge, the frets will appear to hit below the bridge.

4. Improper neck angle. Sighting the neck to the bridge, the frets will appear to hit below the bridge.

NOTE: All guitars will have a certain amount of “bellying” behind the bridge. This alone is not an indication of a wet guitar. Look for a combination of these symptoms to determine if the guitar is getting too humid.

 

Swollen Neck Image
The neck angle when wet. The top is so swollen that the bridge has risen above the fingerboard (see broken lines). If you were to “sight” down the neck, you'd find that it points “low” on the bridge.
514ce correct universal set angle
Here, the neck angle is correctly set. Notice that if you sight down the neck to the top of the bridge, the top of the frets and the bridge are on the same plane.
In wet areas, prevention is best:
  1. If your climate does not have high humidity year round, consider using the Two-Way Humidification System from D’Addario®. Featuring two-way humidity control technology, the breathable membrane packets will automatically maintain a relative humidity level of 48 percent by absorbing excess moisture in humid environments.
  2. In areas with extreme or year round high humidity, place several silica gel or bamboo charcoal packs in the guitar case and change them every few months.
  3. Use a room de-humidifier where you store your guitar. It’s also wise to monitor the humidity levels with a digital hygrometer. You can find a good digital hygrometer through your local music stores, TaylorWare® at taylorguitars.com, Amazon.com, or other online retailers.
  4. Periodically remove the guitar and blow-dry the interior of the case with a hair dryer for 10-15 minutes.
A note on Taylor layered wood guitars:

The Taylor 100 Series, 200 Series, Academy Series, Baby Taylor, Big Baby and GS Mini models feature a layered wood back and sides with an arched back. The arch is by design and allows us to add depth and strength to the guitar body without bracing the back. Don’t be alarmed by the sight of the pronounced back arch on these models as this is completely normal.

Customer Service

United States and Canada

1-800-943-6782

Monday - Friday

8:00 a.m. - 4:30 p.m. PST

Our El Cajon, California and Amsterdam, the Netherlands Factory Service Center staff can help with any service, maintenance or repair questions concerning Taylor guitars.

Europe

+31 (0)20 667 6033

Monday - Friday

8:00 a.m. - 4:30 p.m. (CET)